IQOS ILUMA PRIME Diagnostic Tool

A Jade Green IQOS ILUMA PRIME Pocket Charger and Holder.

1. Use the IQOS power adaptor and cable to power up your IQOS ILUMA PRIME Pocket Charger. It will take 2 hours and 15 minutes to get fully charged.

2. If your Pocket Charger is completely out of battery, it's normal to have to wait up to 20 minutes before you start to see a charging light pattern.

Green IQOS ILUMA PRIME Pocket Charger on a table.

1. Try cleaning the contacts of the Holder and the Pocket Charger

2. If you are simultaneously charging Pocket Charger as you are charging your Holder it is important to charge the Pocket Charger with using the manufacturer-approved power adaptor and cable.

An IQOS ILUMA device in a charging station with a Pocket Charger on a table.

1. 3 blinking white lights: indicate that the Holder is simply out of temperature range. Try maintaining the device between 0°C and 50°C to ensure the device works properly.

2. 8 blinking white lights will indicate that the Holder can only manage 1 experience. Get more help with our Self-diagnosis tool.

A person placing an IQOS ILUMA Pocket Charger into a charging station.

Place the Holder in the Pocket Charger and reset it by pressing the Pocket Charger’s button for 10 seconds. Keep the button pressed until you see all the lights dim out. The RESET will be confirmed by all the lights briefly blinking white.

A Jade Green IQOS ILUMA PRIME Holder and Pocket Charger in a person's hands.

1. Make sure the TEREA stick wasn't accidentally used twice. Or check that it's not just an individual TEREA stick that isn't fitting properly. Isolated cases of TEREA sticks not fitting rarely occur and it's almost never caused by a fault in the device.

2. Ensure the TEREA stick was inserted correctly as per the user guide instructions.

3. TEREA packs should not be stored in an environment which is too humid or too dry. Doing so can have an effect on the aerosol quality.